Conclusion:
If you want a device that gives you the required nicotine level in a practical way, I advise you to use a puff device such as the following devices. However, if you want low nicotine with a lot of smoke, you can go for a hookah.
To be able to answer these questions, we must know the following important information, which is considered essential in the world of vaping:
The lower the resistance, the higher the electric current, which increases the temperature of the coil quickly and significantly, leading to increased evaporation. For the process to be completed, a large energy source is needed to cover the consumption.
Based on this information, we can decide...
The higher the resistance, the less the electric current flow and therefore the less heat, which leads to slow evaporation of the liquid, allowing you to fully enjoy the flavor and nicotine. Therefore, there is no high vapor rate, which results in less battery consumption and flavor consumption.
The appropriate resistance to the draw is your choice, what do you want? Do you want the liquid to evaporate slowly, very slowly, or very, very, very slowly? For the taste to be more and more and more concentrated?
The appropriate resistance for the draw starts from 1 ohm or more. For example, the resistance of the Zero Pod is 1.2 ohm, the resistance of the Nord draw coil is 1.4, the resistance of the RPM 40 draw coil is 1 ohm or 1.2 ohm, the resistance of the draw pod with the pod stick is 1.3 ohm...etc.
Unlike the pull.
The lower the resistance, the greater the electric current flow, and thus the coil heats up faster, leading to rapid evaporation of the liquid. Therefore, there is a high vapor percentage, which results in increased battery consumption and flavor consumption.
The appropriate resistance for the hookah is your choice, what do you want? Do you want the liquid to evaporate quickly? Do you want a very high percentage of smoke? The lower the resistance, the higher the percentage of smoke you will get, but do not forget that you will consume a larger amount of flavor. And of course, you may need an additional battery for the device, and the amount of coil consumption and burning will increase.
The appropriate resistance for a hookah generally starts from 0.8 ohms and less. For example, the resistance of a Nord hookah coil is 0.6, the resistance of a RPM hookah coil is 0.4, the resistance of a pod stick hookah is 0.6 ohms, etc.
This topic is relative, if I may say so, it is up to your choice. You are the one who will increase and decrease the wattage to reach the vaping and taste you want, based on the above, taking into consideration the coil’s tolerance ratio. All coils come with the highest wattage they can handle written on them. Otherwise, it reduces the life of the coil and leads to its damage.
For example, the RPM 80 hookah comes with 2 coils.
0.4 coil handles up to 25 watts (you will get a reasonable amount of vapor and taste the flavor well)
0.17 coil can handle up to 80 watts (note that the lower the resistance, the higher the wattage, so that there is sufficient heating) (you will get a very, very high amount of vapor and you may not taste the flavor enough due to the speed of combustion)
Can vape flavors (freebase) be used on a vape device such as the Zero or what is called a pod system?
In short, the answer is yes, but:
1) Some devices give you a signal on the screen or the device’s lighting starts flashing, knowing that the device has been fully charged. In this case, the pod or coil must be changed.
2) When feeling a strong burning taste and a change in taste
3) Unbearably heavy flavor leakage.
4) The flavor color changes significantly.
The life of the pod and coil is relative, meaning it depends on several factors. It may last for a day or it may last for more than two weeks, but in general it must be changed after two weeks to get natural vaping.
1) Usage quantity, how long daily it is used?
2) How to use, is the pod drawn while empty of flavor? This affects the life of the pod or coil
3) Choosing the right flavor for the coil or pod. For example, using a freebase vape flavor (shisha) on a special coil for a puff affects the life of the coil or pod.
This is one of the biggest problems that everyone faces. Leakage is annoying, makes you lose flavor, and may negatively affect the life of the device. To solve this problem, you must follow the following instructions:
1) Not filling the pod or tank completely.
2) Change the pod and coil continuously. The change depends on the usage. If you use it a lot, you may need to change it every 3 days, or if you use it lightly, the period should not exceed two weeks.
3) Weak battery, the evaporation process needs good energy to evaporate the liquid, weak battery plays a major role in not completing the process as required, be sure to charge the device continuously
4) Do not pull hard. Pulling hard does not give the coil or pod enough time to evaporate, which results in the flavor evaporating during the pull.
5) Use the right flavor with the right coil. For example, the draw coils need salt flavors. If vape flavors are used, this may affect the evaporation process and may result in flavor leakage.
